• Size: 12.00 m X 4.00 m;
• Final weight: approximately 17.00 kg (355 Kg / sq.m.);
• Structure: metallic bended, welded and after fabrication hot dipped galvanized steel with 260 mm height, 9 mm thickness and 100 mm width, weighing 2,400 kg as per ASTM Norms A36 and A570C;
• Galvanization: hot dipped galvanize as A 123 and A 153 ASTM Norms;
• Floor: 120 mm thickness reinforced concrete (4,500 MPA) of with structural longerons and CA 50 positive bars, and Telcon® mesh (5.0 mm metal wires and 150 mm X 150 mm mesh);
• Coupling screws: 4 units, 1” diameter X 12” length (ASTM Norm A 325 and A 307), hexagonal nuts and locknuts (ASTM Norm A 294-2H), EPDM spacer blocks;
• Floaters: high density expanded polystyrene blocks with 33 cu.m. per module;
• Floater revetments: textile vinyl compound with high mechanical and chemical resistance;

UNIT RELEVANT DATA

• Free Board: 58 cm average (sea water);
• Draught: 42 cm average (sea water);
• Overloading capacity: up to 330 kg / sq.m. (in accordance with the NBR 6120 Norm);
• Modulation Flexibility: several modulation assembly possibilities with fast alterations ways;
• Fastening between modules: 4 screws of 1 ½”, hexagonal nuts and lock nuts;
• Free circulation area: 48 sq.m.;
• Mooring: it allows the mooring of small, medium and large sizes* recreational boats;
• Services: floor lights, hydraulic and electric plugs installation possibility without structural alteration;
• Environmental: all utilized materials are environmental inert (environmental friendly) and/or recyclable, not causing any offense to the environment and, in some cases, it could be used as wave attenuators, avoiding artificial wharf protections (harbor quays / wharfs), thus minimizing the environmental impact;
• Stability: due to its characteristics of area, gravity center and weight of almost 17 tons, it has good inertia, making the product highly stable and even being useful as winds wave attenuators at protected or semi protected/sheltered areas;
• Manufacturing Standards: in accordance with the Brazilian Association of Technical Norms – ABNT and with the complement of AISC, ASTM, ANSI and DIN Norms;
• Warranty: 5 years against corrosion of metallic structure and floatation loss over 10%;
  
  (*) depending upon the adopted modulation.